Engineer Codes for CHUBB & ADT Panels

                                              Chubb
Some panels use engineer code 1630  or CA500 windsor panels 
    powered down when power returned default code is 997823
www.chubbexport.com/pdfs/IPS_PDF/IPS102.pdf



ADT code on Galaxy is 32560 


Secom use same panels  engeer codes used are 9513 or 4409

Changing user code on ADE panel

To change you user code

from day mode

1. press program
2, enter your Old Code
3, press number 8  four led's light up
4, enter new code
5, press reset

ADE Optima factory Default reset

             

                               To reset remove power mains/battery and bell +  


1.Put a link between 13(pa) and 23 (set+)

2. MAKE SURE ALL ZONE ARE CLEAR AND TAMPER ARE CLEAR including lid tamper
3. Then apply power and remove link.    
4.You should see panel go to day mode default code
5. Is now 0123